Read this guide in full before operating the Movebooth iPad Photo Booth. Retain it for future reference. Improper installation or use can result in electric shock, fire, injury, or death. Failure to follow these instructions may void warranty coverage and transfer liability for resulting damage or injury to the operator.
Symbol Legend
WARNING — Indicates a hazard that may cause serious personal injury or death.
PROHIBITED — Indicates an action that must not be performed.
CAUTION — Indicates a hazard that may cause equipment damage or property loss.
Stop Use Immediately
Disconnect power, unplug the unit from the outlet, and contact Movebooth support before further use if any of the following occur:
Unstable supply voltage.
Abnormal sound, smell, or smoke from the device.
A damaged DC power cable.
The unit is dropped, struck, or otherwise physically damaged.
Liquid or foreign material enters the enclosure.
Gas leak: If you detect coal gas or any flammable gas, do not unplug this unit or operate any other electrical appliance. Shut off the gas supply at the valve and ventilate the area immediately.
WARNING — Risk of Electric Shock, Fire, or Death
Power and electrical
Use only a 100–240V AC supply. Movebooth recommends a standard adapter or one with an internal circuit breaker; non-compliant power supplies may damage the device.
Disconnect power before connecting or disconnecting any cable.
Do not use damaged or unsuitable outlets. Ensure the plug seats fully and makes proper contact.
Do not touch the plug with wet hands.
Do not allow dust or metal debris to accumulate on the plug or outlet.
Do not overload a single outlet with multiple plugs; excessive draw may cause fire.
Power cord
Do not modify the cord, place heavy objects on it, or route it near heat sources.
Do not yank the cord to disconnect; grip the plug.
Placement and environment
Place the unit on a stable surface. Do not install it where it is exposed to direct sunlight, humidity, extreme temperatures, or excessive dust, or in flammable, explosive, or corrosive-gas environments.
Do not block the chassis ventilation openings; obstruction causes overheating.
Keep open flame (e.g., lit candles) away from the device.
Do not insert sharp objects, metal, or liquid into the signal terminals; doing so risks short circuit, damage, or shock.
Do not use during storms or lightning. To prevent strike damage, disconnect the power and antenna connections.
The unit is not waterproof. Do not use outdoors in rain or other wet conditions.
Service
Do not disassemble or attempt unauthorized repair; this risks electric shock or fire. Refer all service to a qualified technician.
CAUTION — Risk of Damage or Property Loss
Do not allow children to climb on the equipment. Keep small parts away from children to prevent choking.
Power off and unplug the unit when it will be unused for an extended period.
Before repositioning, disconnect all cables and move the unit slowly to prevent tipping.
Do not scratch, strike, twist, or squeeze the unit with hard objects.
Operate under adequate lighting. Poor lighting or prolonged viewing can strain eyesight.
Insert the plug fully and correctly; a loose connection can cause sparking and fire.
Cleaning
Unplug the unit before cleaning.
Wipe with a soft, dry cloth only.
Do not use industrial chemicals, cleaning fluids, or water. Liquid ingress can erase printed markings, damage internal parts, and cause device failure. Prevent foreign matter from entering the enclosure.
Compliance & Support
This is a Class-A product and may cause radio interference in a residential environment; if so, use the power plug as a disconnecting device and take appropriate corrective measures. Specifications and packaging are subject to change without notice, and this guide may differ slightly from actual operation. If the equipment does not operate correctly, cut power immediately and contact Movebooth support.